If you are getting a vmware kernel pae error, this guide should help.
I recently moved several Citrix Application Server VMs from our ESXi environments to our new ESX environment.
Today, some users complained that the real Citrix application didn’t work and reported a memory error before trying to run it. After investigating the issue, everyone realized that if we looked at each of our properties on all VMs in ESX, all PAE would be enabled even though there was still no /pae switch in the actual boot.ini. I then looked at their remaining VMs on ESXi, none of them, and also some of them say they definitely use PAE, and successfully assumed that the Citrix VMs weren’t using PAE, although there is a good chance they are on ESXi.
A little research has shown that we often disable Data Execution Prevention (DEP) using the /noexecute=alwaysoff switch in boot.ini, which will solve our problem. So everyone has tested this and are pretty sure that the specific memory error is gone and company employees can use the Citrix app they couldn’t use before, in case the /noexecut switche was set to logout.
So anything to do with aggregating all ESXs using PAE can be in region f, and there are some issues with how it works with DEP.
Since the Citrix Application VM only has 1 GB of virtual memory, I don’t see the need for PAE. So I would like to know if there is a way to detect that ESX is not using it?
I just tried changing the /noexecute=optout and /noexecute=alwaysoff switch in boot.ini to /execute and that will remove PAE but also disable DEP, which we would never prefer to do if possible< / p>
I was unable to install VMware Tools on Fedora 20, 15, or 12 because vmware-config-tools.pl does not see the kernel header. The RPMs installed with my “yum groupinstall developer tools” were installed.
It looks like “yum install kernel-headers” has its own situations. I noticed that after this uninstall/install, the “build” connection breaks, as shown in:
The legitimate path in /usr/src does not support the .PAE file modified for /usr/src/kernels/3.4.7-1.fc16.i686
I also tried Optimize main headings (from Community by Discussions).
Maybe I was trying to tell vmware-config-tools.pl to explicitly use any path in our own /usr/src/kernels/3.4.7-1.fc16.i686.PAE , /lib/modules/3.4 . 7-1.fc16.i686.PAE/ since the trees are fine when the paths to the modified pathnames come from all /lib/modules/3.4.7-1.fc16.i686/ /usr/src/kernels/3.4 . 7-1. fc16.i686/
Hopefully someone will provide more information on what seems to be a common Fedora issue.
What is not clear about the above solution? What do you mean?
(or use yum with the correct option depending on the information you need
If your organization is not familiar with installing yum software, with a usage example (type “man yum” for more information)
You don’t need to install each package separately (from my original post),
Installation tools (I don’t remember the name of the script, but it’s obvious
You can find out the ls type, which helps to list the files in the unzipped directory).
I (presumably) did whatAs pointed out on FedoraForum, with some result.
Please note that I’m not a Linux expert and I’m trying to set up my Linux system to test…
I also display it as suggested by the FrdoraForum site (ls -s /usr/src/ … )
I’ll start with the VMware tools and stop giving proper header assignments when asked.
I’m sure I’m missing an important step, but I can’t tell any…
I installed VMWare Server, updated my hardware to version 7, uninstalled VMWare Server, and reinstalled VMWare Player. Now I can change the storage settings to more than 3.6GB. Selecting 32GB as shown. I set the storage to 2 GB, I can see it in the VM settings. So far so good.
But my problem is still there!!!. I did a certain “top” in the guest OS before increasing the disk space to 7.2 GB and after that I don’t see much difference. Here are the results:
Top – 17:21:27 to 1 min, low users, load average: 0.81, 0.30, 0.10
Objectives: 127 total, run first, 126 sleeping, zero stopped, 0 zombies
CPU: 0.7%us, 1.0%sy, 0.0%ni, 97.2%id, 0.0%wa, 0.1%hi, 0.0%si , 0.0 %st
Memory:total 3,107,592 KB, 504,568 KB used, 2,603,024 KB free, 47,088 KB buffer
Swap: total 3047416k, viewed 0k, free 3047416k, cached 334232k
above – 17:13:47, five minutes later, 2 users, average per thousand: 0.11, 0.21, 0.127 10
Tasks: total, 1 running, 126 trying to sleep, 0 stopped, 6 zombies
CPU: 0.1%us, 0.1%sy, 0.0%ni, 99.1%id, 0.6%wa, 0.0%hi, 0.0%si, 0.0 %st
Memory: 3,107,592 KB total, 483,860 KB used, 2,623,732 KB free, 25,768 KB buffer
Swap: 3047416k merged, 0k used, 3047416k freed, 335784k cachedClick here to get a complimentary download that will help you clean up your PC.
Co Może Powodować VMware Kernel Pae I Konkretny Sposób Jego Naprawy
VMware Kernel Pae의 원인과 해결 방법
Qu’est-ce Qui Cause VMware Kernel Pae Et Comment Y Faire Face
O Que Causa O VMware Kernel Pae E Como Corrigi-lo
Vilka Konsekvenser VMware Kernel Pae Och Sättet Att Fixa Det
Cosa Causa VMware Kernel Pae E Come Risolverlo
Wat Veroorzaakt VMware Kernel Pae En Hoe Je Het Kunt Zien
Что вызывает VMware Kernel Pae и как это исправить
Welche Punkte VMware Kernel Pae Zeigt Und Wie Man Es Behebt
Qué Causa VMware Kernel Pae Y Cómo Corregirlo